solar power system HF2420S60-100 parallel connection Series
(Max.Voc:100V;Rated input voltage:220/230V)
RELEVANT CERTIFICATION
NAMING CONVENTION
PRODUCT SCHEMATIC
APPLICATION SCENARIOS
Parameters
Performance characteristics
- Ithas the function of segmented charging and discharging.
- Backflow prevention and grid connection function.
- Insulation resistance and leakage current detection function.
- Working without battery under special conditions.
- Lithium battery activation function, which can be trigger ed by mains or PV.
- Power saving mode, reduce no-load loss.
- Four charging modes: PV Only, Mains Priority, PV Priority and PV&Mains hybrid char ging.
- Two output modes: mains byp ass and inverter output, with UPS function.
- 360°all-round protection.
- Allow lead-acid battery and lithium battery access.
- ON/OFF switch controls the inverter AC output
- Grid-connected mode can be set.
- Adopting full-digital double closed loop control, combined with advanced SPWM.
- technology and pure sine wave output.
- Advanced MPPT technology with efficiency of 99.9%.
- LCD screen and three LED indicator lights can clearly indicate the status and data.
- Intelligent and variable-speed fan, efficiently dissipate heat and extend system life.
- Multiple safety protection functions: short circuit protection, overload protection, reverse polarity protection and so on.
Product characteristics
Warning!
Do not immerse the inverter in water and keep it dry when not in use;
Do not knock, throw or allow the inverter to be used near a fire or in extremely hot conditions;
Charge with the specified charge according to the charging requirements;
Do not reverse the position of the positive (+) and negative (-) poles
Do not place the inverter in a fire or direct heat.
Do not short-circuit the inverter by connecting wires or other metal objects to the positive (+) and negative (-) terminals of the inverter
Do not transport or store metal objects of the inverter, such as necklaces, hairpins, etc;
Do not knock, throw, step on, bend, etc;Do not solder the terminals of the inverter directly;Do not pierce the inverter housing with nails or other sharp objects.